Snubber capacitor RC

Features:1) Capacitance dielectric: metallized polypropylene (polyester) film

2) Resistor: non-inductive, high pulse resistor

3) Leads: tinned wire or polyvinyl chloride (PVC) insulation stranded copper     wire

4) Coating: epoxy resin (UL94V-0)

5) Category: X2 class

6) Reference standard: IEC384-14 GB/T1447298; EN132400; UL1283 

7) Climatic catalogue: 40/100/21 

8) Capacitance versus rated voltage (UR): (series) 0.01uF-1.0uF 300V AC     (parallel) 0.01uF ~ 0.68uF 300V AC

 9) Resistance and power: (series) 10 ~ 470Ω, 1/4, 1/2, 1.0 or 2.0W     (parallel) 1.0~2.2MΩ, 1/4,1/2,1W

10) VOLTAGE PROOF: 4.3 x UR (1 minute at 20°C)

 11) Insulation resistance: C≤0.33uF; IR≥5,000MΩ; C>0.33uF;      IR x ≥5,000s (1 minute at 20°C and RH≤65%) series only 

12) Capacitance tolerance: M=±20% K=±10% J=®5% 

13) Endurance: the test voltage 125% shall be applied for 1,000 hours in the      85°C chamber; each of these voltage shall be applied to each capacitor     individually through a resistor of 47Ω±5%, during this period,     1,000V AC 60Hz for 0.1s be applied once each hour 

14) Test report:     

 a) C/C1≤0%; IR≥50% of the specified value   

  b) DF≤0.8%; (Cle;1uF)     

c) DF≤0.5% (C>1uF); (at 20°C 1kHz)