MKP capacitor

Features:
1) Dielectric: polypropylene/polyester film
2) Electrodes: vacuum evaporates metal
3) Coating: encapsulated in reinforced flame retardant plastic case sealed
with epoxy resin the requirement off Ul94V-0 leads: IEC 384-14 (2nd
edition, 1993) UL1414, UL1283, GB/T14472-1998, EN132400
4) Reference standard: 40/85/21 (GPE) 40/100/21(GMF)
5) Climatic catalogue: 0.001uF-2.2uF/275V AC (50/60Hz)
6) Capacitance versus rated voltage (UR): 0.001uf-2.2uf/275V AC (50/60Hz)
7) Capacitance tolerance: M = +20% K = +10% J = +5%
8) Dissipation factor (tangent of loss): ≤0.1% (PP) ; ≤1.0% (PP);
(at 20°C, 1kHz)
9) Voltage proof: 4.3 x UR unit: VDC (1 minute at 20°C)
10) Insulation resistance: C≤0.33uF IR≥15, 000Mohm;C>0.33uF IR x
C≥5, 000S (1 minute at 20°C and RH≤65%)
11) Endurance: the test voltage 125% shall be applied for 1,000 hours in
the 85°C chamber
12) Each of these voltages shall be applied to each capacitor individually
through a resistor of 47ohm±5%. During this period, 1,000V AC
60Hz for 0.1 second be applied once each hour
13) Test report:
a) C/C≤10%; IR≥50% of the specified value
b) DF≤0.8% (C≤1uF) ;
c) DF≤0.5% (C>1uF); (at 20°C 1kHz)