Metallized Film Capacitor--Box Type

Discription according to the Photo No.

1 X2, Redio Interference Suppression X2 Capacitor

Features:
1) Dielectric: polypropylene/polyester film
2) Electrodes: vacuum evaporates metal
3) Coating: encapsulated in reinforced flame retardant plastic case sealed with
epoxy resin the requirement off Ul94v-0 leads: IEC 384-14 (2nd edition, 1993)
UL1414, UL1283, GB/T14472-1998, EN132400
4) Reference standard: 40/85/21 (GPE) 40/100/21 (GMF)
5) Climatic catalogue: 0.001uF-2.2uF/275VAC (50/60Hz)
6) Capacitance versus rated voltage (UR): 0.001uf-2.2uf/275VAC (50/60Hz)
7) Capacitance tolerance: M=+20% K=+10% J=+5%
8) Dissipation factor (tangent of loss): ≤0.1%(PP) ≥1.0% (PP); (at
20°C, 1kHz)
9) Voltage proof: 4.3 x UR unit: V DC (1 minute at 20°C)
10) Insulation resistance: C≤0.33uF I≥15,000MΩ; C>0.33uF IR x
≥5,000s (1 minute at 20°C and RH≤65%)
11) Endurance: the test voltage 125% shall be applied for 1,000 hours in the
85°C chamber. Each of these voltage shall be applied to each capacitor
individually through a resistor of 47Ω±5%. During this period, 1,000V
AC 60Hz
for 0.1s be applied once each hour
12) Test report:
a) C/C≤10%; IR≥50% of the specified value
b) DF≤0.8% (C≤1uF);
c) DF≤0.5% (C>1uF); (at 20°C 1kHz)

2 MAC(CBB61) Metallized Polypropylene(Polyester) Film Capacitor(AC USAGE)

Features:
1) Dielectric: polypropylene/polyester film
2) Coating: vacuum evaporated metal
3) Leads: encapsulated in engineering plastic case sealed with epoxy resin
meeting the requirement UL94V-0
4) Capacitance versus rated voltage: 1.0uf-13uf 250VAC, 400VAC, 500V AC
5) Capacitance tolerance: M=±20% K=±10% J=±5%
6) Reference standard: GB/T 3667-1997, UL810 IEC60252-1
7) Climatic catalogue: 25/70/21
8) Insulation resistance: T-T C<0.47µF IR≥2,000Ω
≥0.47µF IR≥1,000MΩ T-C ≥2,000MΩ
(1 minute at 20°C, RH≤65%)
9) Endurance after testing: 600 hours with 125% of rated voltage at 70°C
10) C/C≤5%;IR≥50% of the specified value

3 MXY NOISE SUPPRESSION CAPACITOR(ENCASED)

Features:
1) Dielectric: UL94v-0
2) Electrodes: radial leads of tinned wire
3) Coating: UL1414; IEC 384-16
4) Climatic catalogue:40/85/21
5) Capacitance versus: 0.047µF-0.47µF(x2) 0.001µF-
0.0047µF(Y2)
6) Rated voltage:275V AC (50/60Hz)
7) Capacitance tolerance: M=±20% K=±10% J=±5%
8) Dissipation factor: ≤0.1% PP; ≤1.0% PE (at 20°C 1kHz)
9) Voltage proof: 4.3 x UR (1 minute at 20°C)
10) Insulation resistance: C≤0.33µF I≥15,000MΩ C>
0.33µF IR x ≥5,000s (1minute at 20°C and RHΦ65%)
11) Endurance: 1,000 hours with 344VAC at 85°C, during this period,
880V AC 60Hz for 0.1s be applied once each hour
12) Test report:
a) C/C≤10%
b) D≥0.3%; IR≥50% (20°C 1kHz)

4 X2, Redio Interference Suppression X2 Capacitor---TAPPING VISION

5 MPC (CBB23) Metallized Polyprorylene Film Capacitor(Encased)

Features: 
1) Dielectric: polypropylene/polyester film 
2) Electrodes: vacuum evaporated metal 
3) Coating: encapsulated in reinforced flame retardant plastic case sealed 
    with epoxy resin UL 94v-0  
4) Reference standard: IEC 384-2 grade1; SJ/T10873-1996 
5) Climatic catalogue: 55/085/21 
6) Capacitance versus rated voltage (UR): 0.01µF-6.8µF/100V DC 
    0.01µF-6.8µ F/250V DC 0.01µF-2.2µF/400V DC; 
    0.01µF-1.5µF/630V DC 
7) Capacitance tolerance: M=±20% K=±10% J=±5% 
8) Dissipation factor (tangent of loss): DF≤0.10% (at 20°C 1kHz)  
9) Voltage proof: 1.6 x UR (5s at 20°C) 
10) Insulation resistance: C≤0.33µF, I≥15,000mΩ, C>
     0.33µF, IRx≥3,000s (1 minute at 20°C and RH≤65%) 
11) Endurance: 1,000 hours with 125% of rated voltage at 85°C
12) Test report: 
     a) C/C≤8%
     b) DF≤0.30 (C>1µF)
     c) DF≤0.50% (C≤1µF); IR≥50% (20°C 1kHz)

Features:
1) Dielectric: polyester film 
2) Electrodes: vacuum evaporates metal 
3) Coating: encapsulated in reinforced flame retardant plastic case sealed with
    epoxy resin meeting the requirement of Ul94v-0 
4) Leads: radial leads of tinned wire 
5) Reference standard: GB7322; IEC60384-2  
6) Capacitance versus rated voltage (UR): 0.0010µF-1.0µF/50V DC, 
    63V DC, 0.001uF-0.68uF/100 V DC, 0.001uF-0.15uF/250V DC 
7) Capacitance tolerance: M=±20%, K=±10%, J=±5% 
8) Dissipation factor: ≤1.0% (at 20°C 1kHz) 
9) Voltage proof: 1.6 x UR (5S at 20°C) 
10) Insulation resistance: C≤0.33µF;I≥1,500MΩ; 
     C>0.33µF; IR x C≥3,000s; Ur≤100V testing by 50V, UR >100V testing
     by 100V (1 minute at 20°C and R≤65%)
11) Endurance: 1,000 hours with 125% of rated voltage at 85°C
12) Test report:
     a) C/C≤5%
     b) DF≤0.20%; C≤0.1µF; IR≥9,000MΩ; 
         C>1µF; IR≥50% (20°C 1kHz)